Secured with Epoxy:
EPB44PHDG - Drill a 7/8" diameter hole 4" deep minimum and fill the hole halfway with SET epoxy or drill a 13/16" diameter hole 4" deep minimum and fill the hole halfway with AT adhesive. Insert the EPB44PHDG and adjust to the desired height. The threaded rod shall be embedded a minimum of 3 1/2". Minimum side cover is 3" from the center of the threaded rod for both products.
Supported by Nut:
EPB44PHDG - Drill a 1" diameter hole 3 1/2" deep minimum. Insert the EPB44PHDG and adjusts to the desired height.
Embedded in wet concrete:
Embed 5/8" rod minimum 4" embedment.
Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).
|Package Quantity||EPB44PHDG -Threaded rod support 3/4"x6", nut and washer are shipped assembled.|
|Search by Manufacturer||Simpson Strong Tie|
More About our Products
More reasons to buy this product, and the tools to help you do more
Deck Perks Loyalty Program earn points for tagging this item, Writing a review, sharing the link and of coarse making a purchase.
Get Something Free Many products offer free or discounted items with purchase of a related item
Calculators Use the tools below to calculate the number of balusters need to fill your rail, cut your stairs, and more