BOSTITCH 3" X .120" 28° Wire Weld Framing Nails S10DRGAL-FH (2000 ct)
- Full Roundhead 3" x .120" 28 Degree Wire Collated Framing Nail
- Thickcoat galvanized finish delivers consistent, corrosion-resistant performance in pressure treated lumber and exterior applications.
- Ring shank geometry provides maximum withdrawal capacity when extra holding power is required
- 2,000 per Box
- Works in: N79WW, N80SB, N86CS, N88WWB, N100S, F28WW
Bostitch® manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch® tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity, and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance. Bostitch® stick nails are designed, engineered and manufactured in four different forms and are generally identified by what holds the nails together – plastic, wire, paper or adhesive. Adhesive collation is used on finish nails and brads for trim and fine woodwork. Finish nails and brads range in length from 3/8” to 2-1/2” with diameters ranging from 15 to 23 gauge. The plastic, wire, and paper collated nails are used for general framing and crating applications. Stick nails range in length from 1-1/2” to 6-1/4” with diameters ranging from 0.113 to 0.165 inches.
||3" in length | .120 diameter | 28 Degree