ARE YOU ORDERING THE CORRECT SIZE POST CAP or TRIM? We list the opening size of the post skirt. The size you select should measure equal to or slightly larger than your post in order to slide into place over the post. Example: A 6x6 post may actually measure 5.5" x 5.5" you would therefore order a 5.5" cap not a 6" one. Please contact us if you’re unsure which size you’ll need. The Deck Store Online has partnered with this manufacturers to have these caps and bases made for you. While most common sizes are in stock special sizes are made to order and shipped directly from the factory. Please allow 7-10 days for this item to be produced and shipped to you.
Island Slip Over Post Cap are available in Real wood and Composite for Any Post Size 3-1/2"up to Full 10"
MATERIALS... Island Slip Over Post Caps are available in Clear Vertical Grain Kiln-Dried Redwood, Clear Western Red Cedar, Ironwood (IPE), Kiln Dried African Mahogany, and AZEK White Composite, a plastic/wood composite made to look like wood.
Though not as beautiful as the Redwood or Western Red Cedar products, Azek Post Caps offer these benefits:
- • Impervious to insects and moisture.
- • Will not rot, split, twist or warp.
- • Looks and feels like white painted wood.
- • Accepts paint easily for a custom color.
- • 25 year warranty on material defects mentioned above.
INSTALLATION... For a nail-free look, simply apply an exterior grade adhesive, to the top of the post and slip the post cap over, straighten and walk away! (Stainless steel finish nails may be used).
CONSTRUCTION... Slip over caps are crafted using a five-piece construction, with galvanized V-nails in each corner of the molding. Twelve or more stainless steel staples are used to permanently fasten the molding to the underside of our post cap.
||1 Island Slip Over Post Cap
||Nantucket Post Cap
||3-1/2" up to 10" larger sizes available upon request.