HU/HUC - Use all specified fasteners. See General Notes. HU/HUC - can be installed filling round holes only, or filling round and triangle holes for maximum values. HGUS - Nails must be driven at an angle through the joist or truss into the header to achieve the table loads. With 3x carrying members, use 16d x 2 1/2" (0.162" dia. x 2 1/2" long) nails into the header and 16d commons into the joist with no load reduction. With 2x carrying members, use 10d x 1 1/2" (0.148" dia. x 1 1/2" long) nails into the header and 10d commons into the joist, and reduce the load to 0.64 of the table value.
||Simpson Strong Tie