This very handy hammer tool fits on top of the Titan wood post anchor center support tube and evenly distributes the force of each hammer strike to the tube and base of the anchor. Each strike of the hammer drives the base into the the post.
Installing Titan Post Anchor with the Hammer Tool:
- Take a post with a circular pilot cut on post end and insert sharp end of tube into cut. Tap tube into the pilot cut and orient vertically with post. Check alignment vertical by observing from two sides 90 degree apart
- Place tool over the tube end of 4x4 or 6x6 anchor
- Wear ear and eye protection and work gloves
- Strike tool with 3lbs or larger hammer checking for vertical alignment as tube descends into post. Strike opposing side of tool if required to realign tube vertically
||Machined to 2-5/16" x 1/2" Solid Rolled Steel