WiseCable Legacy WC-LSS Series Stairs

WiseCable Legacy WC-LSS Series for any type of wood post as an inside to inside fitting on a pitch or stair application. The tensioning device is an Adjustable body with Threaded Eye, which attaches via a mounting screw to the lag eye, threaded tab. A push lock with threaded eye attaches the same way to the other end. Pre Assembled Kits from 5' to 50' with all the hardware included. (Equipment and accessories sold separately) For post protector tubes, see Cable Railing Accessories page

Use the WiseCable Legacy WC-LSS Series for any type of wood post as an inside to inside fitting on a pitch or stair application. The tensioning device is an Adjustable body with Threaded Eye, which attaches via a mounting screw to the lag eye, threaded tab. A push lock with threaded eye attaches the same way to the other end.

Top posts are often corner posts, which may require the stair run to connect to the face of the post. The top and bottom of the cable run would be connected perpendicular to those posts, and only the intermediate posts would be drilled on the angle for the cable to run through.

Tools needed for WiseCable Legacy WC-LSS Series on a pitch or stairs:

• 5/32 drill bit if 1/8” cable, 7/32 if 3/16”
• 9/32 drill bit for lag eye installation
• 7/16 wrench for tensioning adjustable body
• 5/32 hex wrench to tighten mounting screws
• Cable cutting tool
• If using post protector tubes, 1/4 drill bit