This item may not be returned or exchanged.
Using this handy connector jig allows the deck builder to quickly and accurately place the railing connectors in the proper position. A variation of even 1/4" can increase the baluster use by several boxes over a typical rail, this jig will pay for itself in the first use.
The Universal Rail Jig is drilled for the connector screws only & works with all baluster types. The Line or Straight Jig puts the connector screws 4-1/2" apart, the Stair Jig spaces them 5-1/4" apart. A typical 3/4" baluster will end up with 3-7/8" spacing. Universal Jigs are not currently available in the triple pattern. You will only be shipped the Line or Stair Jigs.
Need help selecting your installation tool? See instructions below.
Rail Connector Jig Instructions:
Start from the center of any section, mark locations with a pencil, install connectors. Shift this self aligning jig tight to last one installed, or overlap others for perfect alignment, quicker completions, happier customers. Not only just a baluster jig for Deckorators connectors, we can fit all other brands too. Works with stairs and special patterns. If you need a jig you don't see here, contact us and we will make it for you.
|Manufacturer||The Deck Store|
|CA Proposition 65||https://www.thedeckstoreonline.com/proposition-65|