This product is guaranteed! No restocking fees.
This product requires ground shipping.
The Angle Wizard General Purpose Post Mount is made of galvanized steel with PVC guides and is optimal for adding post sleeves to deck railing where there is an awkward angle, or when you just don't want to mess with shims. There is a centering nut in the top guide that is used to adjust the angle of the post.
Installation of the LMT Angle Wizard General Purpose Post Mount is fairly straight-forward. Install the Post Mount to the deck surface with your own fasteners. Slide the bottom mount to the level of your bottom rail, secure with the provided screw. Slide on your post sleeve, level, and plumb, and hand tightens the center nut. Re-check level and plumb and tighten the center nut with a 7/16" socket. Put on the cap - Done!
The Top Guide on these post mounts can be flipped over to add 6" to overall post height. Useful for stair railing. You do have to use a socket extension to tighten the center nut if you do this.
|36" with 4" or 5" PVC guides or 42" high with 4" PVC guides
|CA Proposition 65